Molding Equipment
Mold Concept Boosts Efficiency in Production of Pen and Auto-Injector Components
Higher output, lower unit costs, smaller footprint.
Jann Bond
Managing Editor, Gardner Business Media
Mold Sensor Prevents Accidental Closure in Injection Molds
When tied to the machine control, Burger & Brown Engineering’s Global Thinswitch can help prevent mold crashes due to premature mold close, saving the user downtime and expensive mold repairs.
Read MoreGetting You to Think in Plastic First
For this summer school basics series, Pellet to Part explores each stage of the plastic injection molding process. The final step is to take the lessons learned from this series and figure out how to impart them to the future moldmaking/molding workforce.
Read MorePreparing for Takeover Tooling
For this summer school basics series, Pellet to Part explores each stage of the plastic injection molding process. With the right preparation, moldmakers can insulate themselves from takeover tooling crises and add greater value to the molder.
Read MoreConsiderations for Assessing Robotics Requirements
For this summer school basics series, Pellet to Part explores each stage of the plastic injection molding process. Knowledge of part de-molding, end-of-arm tooling construction, part defects caused by the mold-robot interface and available automation options is key for suppliers looking to add greater value.
Read MoreDesigning a Better Heat Exchanger - Part 3
This summer, let’s get back to the basics. For this summer school basics series, Pellet to Part explores each stage of the plastic injection molding process. In part three of our three-part sub-series on mold water cooling systems, we review the impact a water system can have on mold performance and part quality.
Read MoreDesigning a Better Heat Exchanger - Part 2
This summer, let’s get back to the basics. For this summer school basics series, Pellet to Part explores each stage of the plastic injection molding process. In part two of our three-part sub-series on mold water cooling systems, we review water quality and its impact on mold performance.
Read More
Husky Technologies Innovations in Packaging, Hot Runner, Medical Molding Solutions
Husky showcases portfolio of solutions to support packaging, hot runner, medical markets.
Jann Bond
Managing Editor, Gardner Business Media
Designing a Better Heat Exchanger - Part 1
This summer, let’s get back to the basics. For this summer school basics series, Pellet to Part explores each stage of the plastic injection molding process. This week we review considerations for mold water cooling systems.
Read MoreControlling the Melt Delivery System Heat Source
This summer, let’s get back to the basics. For this summer school basics series, Pellet to Part explores each stage of the plastic injection molding process. This week: understanding the heating systems along the melt delivery path.
Read MoreTooling 4.0: Connecting Industry 4.0 Technology to Your Molds and Molding Process
A packaging supplier applies Industry 4.0 technology to its injection molds so that components talk to each another to understand the dynamics of what is happening inside the mold.
Read MoreDesktop LSR Injection Molding Machine Offers a Cost-Effective, User-Friendly Option for Moldmakers
APSX LLC, highlights its new APSX‑LSR. The company says it is the market’s first bench‑top Liquid Silicone Rubber (LSR) injection system designed for engineers, med‑tech startups and research labs that need production‑quality silicone parts.
Read MoreProblem-Solving Powers MPP's Growth
Long-time Michigan mold builder expands its capabilities, incorporating molding and embracing automation, while maintaining its collaborative problem-solving approach and apprenticeship program.
Read MoreRJG Adds iMFLUX Technology to Injection Molding Offerings
RJG Inc. will supply and support iMFLUX’s pre-engineering, installation and service for all hardware and software components.
Read More
Machine Sizing and Specification for Optimal Mold Performance, Part 2
Properly sizing injection units during mold build prevents production problems and defects.
MMT Chats: Molds, Molding, Marketing and Membership
MoldMaking Technology Editorial Director Christina Fuges chats with Eric Hecker, Sales and Project Engineer for Eifel about his focus on sales and marketing, the move into molding, technology and training trends and his mission to help increase membership in Mold Technologies Division of SPE.
Read MorePTXPO 2025 Profile Preview Part 4 of 4: Discover Cutting-Edge Moldmaking Solutions
Here is a brief overview of some of the advanced moldmaking technologies you’ll find at PTXPO 2025. Join fellow molders, moldmakers, brand owners, OEMs and their full suite of suppliers in Rosemont, Illinois, for three days of nonstop networking, education and business development opportunities where you can network, learn and grow your business.
Read MoreWhat Is Scientific Maintenance? Part 1
How to create a scientific maintenance plan based on a toolroom’s current data collection and usage.
Read MorePTXPO 2025 Profile Preview Part 2 of 4: A Closer Look Into Exhibitor Solutions for Mold Builder Needs
Dive into this sneak preview to get to know more about the exhibitors that will be showcasing a variety of products, technologies and services related to moldmaking at PTXPO 2025.
Read MoreAn Integrated Desktop Approach to Mold Production
Versatile, scalable, additive machining and molding systems optimize moldmaking operations and support training initiatives.
Read MoreWhy Shoulder Bolts Are Too Important to Ignore (Part 1)
These humble but essential fasteners used in injection molds are known by various names and used for a number of purposes.
Read More
Machine Sizing and Specification for Optimal Mold Performance, Part 1
Guidelines to ensure proper mold fit and maximum efficiency in injection molding machines.
Cube Mold Technology Advancing Injection Molding
Injection mold design features a central rotating cube that can split and counter-rotate, with additional gear elements on the exterior.
Read MoreMMT Chats: 5 in 5 with Neu Dynamics
MoldMaking Technology editorial director Christina Fuges chats with Kevin Hartsoe, president of Neu Dynamics to reveal their five best practices for improving efficiencies in culture, technology, process, measuring success and staying competitive ... in 5 minutes.
Read MoreProcess Monitoring, Cold Runner and Nozzles Bring Control, Industry 4.0 to the Mold
Ewikon touches on a few of its popular innovations previously highlighted at K 2019, including the HPS III-MV multi-tip nozzle, smart Control and Coolshot.
Read MorePET Injection Molder Introduces rPET Capabilities
Husky Technology’s HyPET6e design strives to provide customers with sustainable options, including enhanced energy efficiency and closed-loop quality control.
Read MoreUpdated Control, Cooling Water Distribution, Electromechanical Ejector and Injection
NPE2024: Boy’s U.S. subsidiary marks its 50th anniversary in Orlando with six machines and U.S. intros for the Procan ALPHA 6 control, and hybrid ejectors and injection units.
Read MoreStackTeck establishes iMFLUX Center of Excellence
StackTeck has adopted the iMFLUX process to control the injection molding process for PCR projects that bring material viscosity challenges.
Read More
